* 2.4 - Terminal window now logs in user's documents folder instead of program files folder, to prevent * crash caused by folder not being writable. RFD900x net ID range now defaults to 16 bit for * p2p firmware and 8 bit for async firmware, if range isn't specified by modem. * 2.5 - Added TCP port capability. * 2.6 - Can now generate a random encryption key. * 2.7 - Resolved issues in which it asks for IP address and port multiple times when using a tx module. * Also resolved issue in which mission planner's sik radio page doesn't load settings via * tx module when the main part of mission planner had had a connection (but was disconnected). * 2.8 - Added support for multipoint firmware in RFD900a, +, u and x. * 2.9 - Now has a connect/disconnect button. Switching between settings/terminal/rssi views while connected or disconnected works OK. * 2.10- Now supports RFD900ux. Fixed issue in which modem firmware couldn't be programmed after loading settings. * 2.11- Fixed bug in which switching straight to RSSI tab after program start caused exception. Now when * switch to terminal tab, automatically puts modem into AT command mode so user doesn't need to * enter +++. * 2.12 - Fixed tooltip text for GPI1_1R/CIN and GPI1_1R/COUT * 2.13 - Now if a parameter fails to load, that same parameter is not saved back to the modem. * 2.14 - Resolved issue in which modem firmware could not be reprogrammed immediately after programming. * 2.15 - Added firmware programming certified check for RFD900X/UX. Added SBUS, freq/band and antenna parameters * for RFD900x. * 2.16 - Resolved issue in which it was looking for the country string in the wrong part of the ATI command response. * 2.17 - Resolved issue in which pin wasn't being set to output/input when RC out / SBUS out checked / unchecked. * 2.18 - Added text boxes to settings view for local and remote modems to display country code if locked to a country, * as requested by Moreton. * 2.19 - Fixed bug in which programming RFD900x firmware whose file size was a multiple of 128 bytes failed. * 2.20 - Made changes so that it could update firmware and load settings from a modem with multipoint firmware. * 2.21 - Now for modems which use the xmodem protocol for firmware updates (RFD900x and RFD900ux), it waits for * and acknowledgement of the EOT packet before sending the BOOTNEW command. This may or may not * resolve the difficult to replicate issue in which firmware update results in the modem staying in bootloader mode. * Now programs version 3.01 as the reference firmware for RFD900x to check certified (instead of 3.00). * 2.22 - Changed "Set PPM Fail safe" feature so there is one button per local/remote modem. Made it so it is enabled * depending on GPO1_1R/COUT being set. * 2.24 - Improved instructions to user in message boxes. Improved handling of cases where it was unable to communicate * with modem. * 2.25 - Now does auto disconnect/reconnect of serial port after every firmware programming regardless of * success or failure. * 2.26 - Now sets status text to "Programming Failed. (Try Again?)" if it fails to determine which mode the modem * is in when trying to program firmware. * 2.28 - Now has a manufacturing mode support. * 2.29 - Resolved bug in which the value ranges available from the remote modem weren't being parsed and used in the * combo box e.g. for the min and max frequency ranges. Also, added a work-around for an issue in the RFDSiK * RFD900x 3.07 firmware in which it didn't return the complete set of parameters in response to an RTI5? command. * 2.30 - For RFD900x multipoint firmware, now allows correct broadcast id to be selected for Dest ID parameter. * 2.32 - Supports programming of RFD900ux modems. * 2.33 - Corrected available frequency ranges for RFD900+ * 2.34 - Now handles new settings GPO1_1SBUSIN, GPO1_1SBUSOUT, GPO1_3STATLED, and GPO1_0TXEN485 * 2.35 - Fixed bug in which re-loading settings when AES was previously enabled would cause it to disable AES. * 2.36 - Added a retry option message window for when programming firmware fails. * 2.37 - Resolved issue in which a MAX_WINDOW setting value which wasn't a multiple of 20 failed to be set in the settings GUI. * 2.38 - Manufacturing tab now includes lockdown for EU and India. * 2.39 - For checkbox settings for which the modem specifies (in the ATI5? query response) only one option, it now greys-out the checkbox. * This was to cater to the X modem 3.15 firmware in which the ECC paramater can't be changed and is always false. * 2.40 - Now for remote modems which do not specify valid settings ranges, if the remote modem has the same firmware version as the * local modem, then assumes the ranges specified by the local modem. If the remote modem does not specify valid settings ranges * and is a different firmware version to the local modem, informs the user in a message box and advises to use the same modem * firmware version. * 2.42 - Now gets valid parameter ranges out of remote modem for newer firmware which doesn't support the RTI5? query. Now supports the * specified available encryption levels given by the modems (e.g. None/128bit/256bit), instead of just enabled/disabled. * 2.43 - Resolved freezing-up issue which happened for older or non-SiK modem firmware which doesn't yet have ATI10/RTI10 command. * Tidied up GUI layout. * 2.44 - Resolved mavlink setting problem. * 2.45 - There is now a 50ms delay between '+' characters transmitted to modem when doing the "+++" sequence to change mode from transparent to AT command mode, * as this is required by new and future modem firmware releases. * 2.46 - A command line switch is now available to force programming of firmware into modems regardless of type of modem. Removed 50ms delay between '+' characters * transmitted to modem when doing the "+++" sequence to change mode from transparent to AT command mode, * as this is not required by any firmware. * 2.47 - Added GPIO1_1FUNC settings for RFD900x async firmware 2.69. * 2.48 - RSSI page now writes log to the user's documents folder, instead of the program folder, to prevent exception. * 2.49 - Hardened up code to reduce crashes when switching between terminal, RSSI and settings pages. * 2.50 - Added support for FSFRAMELOSS, GPI1_2AUXIN and GPO1_3AUXOUT parameters. * 2.51 - Fixed error message problem when used with multipoint firmware 2.90. * 2.52 - Now uses a more reliable means of reading country code from modems than looking at the string returned by ATI command. * 2.54 - For multipoint firmware, made 255 available as an option for destination node ID. * 2.55 - Changed encryption key text box max length from 32 to 64 hex numerals (for 256 bit encryption). * 2.56 - Now recognises country code 255 as not locked to country. * 2.57 - Now before programming firmware, checks whether modem says it is DINIO. If it says it is DINIO, only allows DINIO firmware to be programmed into modem. * 2.58 - Now supports RFD X rev 2. Now checks that band is compatible with country before locking to a country. * 2.60 - Now supports RFD X rev 2 programming firmware when baud rate other than 57600bps is used. * 2.61 - Now supports RFD UX rev 2. * 2.63 - Settings GUI can now dynamically shows settings read from the modem which are unknown to this software. Supports the * RSSI_IN_DBM, AUXSER_SPEED and AIR_FRAMELEN settings. * 2.64 - Can now save settings to file and load settings from file. * 2.65 - Now checks whether min freq is greater than max freq before saving settings to modem(s). Resolved issue in which it * showed erroneous "Set command error" message when saving encryption key to modem. * 2.66 - Fixed bug for multipoint firmware in which it showed an error message of 'Encryption key not valid hex number * <=32[/64] hex numerals' when saving change to encryption level setting to the modem. * 2.67 - Change FileStream open of download firmware file to read only so files can be stored in read only directories.